ViewTube

ViewTube
Sign inSign upSubscriptions
Filters

Upload date

Type

Duration

Sort by

Features

Reset

19 results

Future Electrical and Electronic Engineering Guru
Positive feedback, pole sensitivity and the MATLAB toolbox | EE 387 – Week 9, Lesson 7

The 0° locus of positive feedback (Example 9.11), the swapped-encoder mistake that turns the rig into one, root sensitivity and ...

9:52
Positive feedback, pole sensitivity and the MATLAB toolbox | EE 387 – Week 9, Lesson 7

0 views

32 min ago

Future Electrical and Electronic Engineering Guru
Sketching Nyquist plots by hand | EE 387 Classical Control – Week 12, Lesson 3

The four pieces of the image; clockwise arcs at infinity for poles on the jω axis; a seven-step procedure; Worked Examples 12.3 ...

11:11
Sketching Nyquist plots by hand | EE 387 Classical Control – Week 12, Lesson 3

0 views

10 min ago

Future Electrical and Electronic Engineering Guru
A complete sketching procedure | EE 387 Classical Control – Week 9, Lesson 3

Nine steps from pole–zero map to MATLAB check, on the fourth-order quadrotor pitch stand of Worked Example 9.8 (breakaway, ...

10:30
A complete sketching procedure | EE 387 Classical Control – Week 9, Lesson 3

1 view

33 min ago

Future Electrical and Electronic Engineering Guru
Why another test? Mapping contours | EE 387 Classical Control – Week 12, Lesson 1

Why delay, measured data and unstable plants need a new test; pushing a closed curve through F(s); Worked Examples 12.1 and ...

10:13
Why another test? Mapping contours | EE 387 Classical Control – Week 12, Lesson 1

0 views

13 min ago

Future Electrical and Electronic Engineering Guru
The generalized root locus | EE 387 Classical Control – Week 9, Lesson 6

Any parameter can play the role of K: rearrange the characteristic equation as 1 + αB(s)/A(s) = 0. Worked Example 9.10: a ...

7:50
The generalized root locus | EE 387 Classical Control – Week 9, Lesson 6

0 views

32 min ago

Future Electrical and Electronic Engineering Guru
Error specifications and designing the gain | EE 387 Classical Control – Week 7, Lesson 5

Worked Example 8.5: what “K_v = 250 s⁻¹” tells you about a CNC axis; Worked Example 8.6: a ramp-error specification against ...

8:19
Error specifications and designing the gain | EE 387 Classical Control – Week 7, Lesson 5

0 views

36 min ago

Future Electrical and Electronic Engineering Guru
Transient design via gain adjustment | EE 387 Classical Control – Week 9, Lesson 4

When a higher-order loop behaves like a second-order one; the five-step gain design; Worked Example 9.9: 10 % overshoot for ...

8:55
Transient design via gain adjustment | EE 387 Classical Control – Week 9, Lesson 4

0 views

33 min ago

Future Electrical and Electronic Engineering Guru
Sketching composite Bode plots | EE 387 Classical Control – Week 11, Lesson 5

A seven-step procedure: factor, start low, walk right, correct, verify. Worked Example 11.6 (a type-1 plant) built factor by factor, ...

8:36
Sketching composite Bode plots | EE 387 Classical Control – Week 11, Lesson 5

1 view

16 min ago

Future Electrical and Electronic Engineering Guru
Static error constants and system type | EE 387 Classical Control – Week 7, Lesson 4

K_p, K_v, K_a and the system type; the master table built cell by cell, and why finite errors lie on its diagonal; a type-1 loop lags a ...

8:35
Static error constants and system type | EE 387 Classical Control – Week 7, Lesson 4

0 views

36 min ago

Future Electrical and Electronic Engineering Guru
The concept of frequency response | EE 387 Classical Control – Week 11, Lesson 1

Sinusoid in, sinusoid out: why a stable system only changes the size and timing of a sine, where M and φ come from (G(jω)), and ...

9:11
The concept of frequency response | EE 387 Classical Control – Week 11, Lesson 1

0 views

28 min ago

Future Electrical and Electronic Engineering Guru
The Joint Rig: friction, ramps and gravity | EE 387 Classical Control – Week 7, Lesson 8

Friction as a 0.4 V dead zone: a band of resting points (Example 8.13); the sweep lag ω/K_v + V_dz/K_p (Example 8.14); gravity ...

9:54
The Joint Rig: friction, ramps and gravity | EE 387 Classical Control – Week 7, Lesson 8

0 views

35 min ago

Future Electrical and Electronic Engineering Guru
Gain and phase margins, and the Joint Rig | EE 387 Classical Control – Week 11, Lesson 7

L(jω) = −1 is the edge of instability; gain, phase and delay margins read from the Bode plot (Worked Example 11.9); the Joint ...

10:30
Gain and phase margins, and the Joint Rig | EE 387 Classical Control – Week 11, Lesson 7

0 views

22 min ago

Future Electrical and Electronic Engineering Guru
Measuring a frequency response, identifying a model | EE 387 Classical Control – Week 11, Lesson 9

Getting one good point with a least-squares sine fit; reading a transfer function from Bode points (Worked Example 11.13, ...

10:35
Measuring a frequency response, identifying a model | EE 387 Classical Control – Week 11, Lesson 9

0 views

14 min ago

Future Electrical and Electronic Engineering Guru
Stability margins on the Nyquist plot | EE 387 Classical Control – Week 12, Lesson 6

Distance to −1: gain margin along the negative real axis, phase margin round the unit circle, the vector margin 1/Mₛ as the ...

8:44
Stability margins on the Nyquist plot | EE 387 Classical Control – Week 12, Lesson 6

0 views

6 min ago

Future Electrical and Electronic Engineering Guru
Physical realisation of compensators | EE 387 Classical Control – Week 10, Lesson 6

Op-amp PI, PD, PID, lead and lag stages; component values for the rig's lead (Worked Example 10.11); passive RC networks and ...

9:10
Physical realisation of compensators | EE 387 Classical Control – Week 10, Lesson 6

0 views

29 min ago

Future Electrical and Electronic Engineering Guru
Improving the steady-state error | EE 387 Classical Control – Week 10, Lesson 2

Ideal integral (PI) compensation and the lag network: a pole–zero pair near the origin that raises Kp or Kv and barely moves the ...

8:27
Improving the steady-state error | EE 387 Classical Control – Week 10, Lesson 2

0 views

31 min ago

Future Electrical and Electronic Engineering Guru
Improving the transient response | EE 387 Classical Control – Week 10, Lesson 3

What one zero does to the locus, PD design from the angle deficit (Worked Example 10.4), lead compensation (Worked Example ...

10:51
Improving the transient response | EE 387 Classical Control – Week 10, Lesson 3

2 views

31 min ago

Future Electrical and Electronic Engineering Guru
Improving both: PID and lag–lead | EE 387 Classical Control – Week 10, Lesson 4

PID as a PD followed by a PI: the Weija dosing loop (Worked Example 10.7) and its pidtune cross-check, removing the gravity ...

10:02
Improving both: PID and lag–lead | EE 387 Classical Control – Week 10, Lesson 4

0 views

30 min ago

Future Electrical and Electronic Engineering Guru
Non-unity feedback, sensitivity and state space | EE 387 Classical Control – Week 7, Lesson 7

Reducing a non-unity loop to unity feedback, G_e = G/(1 + GH − G); Worked Examples 8.8 (a sensor with dynamics) and 8.9 (a ...

10:07
Non-unity feedback, sensitivity and state space | EE 387 Classical Control – Week 7, Lesson 7

0 views

35 min ago