Upload date
All time
Last hour
Today
This week
This month
This year
Type
All
Video
Channel
Playlist
Movie
Duration
Short (< 4 minutes)
Medium (4-20 minutes)
Long (> 20 minutes)
Sort by
Relevance
Rating
View count
Features
HD
Subtitles/CC
Creative Commons
3D
Live
4K
360°
VR180
HDR
20 results
The 0° locus of positive feedback (Example 9.11), the swapped-encoder mistake that turns the rig into one, root sensitivity and ...
0 views
54 min ago
The four pieces of the image; clockwise arcs at infinity for poles on the jω axis; a seven-step procedure; Worked Examples 12.3 ...
33 min ago
Nine steps from pole–zero map to MATLAB check, on the fourth-order quadrotor pitch stand of Worked Example 9.8 (breakaway, ...
56 min ago
Any parameter can play the role of K: rearrange the characteristic equation as 1 + αB(s)/A(s) = 0. Worked Example 9.10: a ...
55 min ago
Worked Example 8.5: what “K_v = 250 s⁻¹” tells you about a CNC axis; Worked Example 8.6: a ramp-error specification against ...
58 min ago
When a higher-order loop behaves like a second-order one; the five-step gain design; Worked Example 9.9: 10 % overshoot for ...
A seven-step procedure: factor, start low, walk right, correct, verify. Worked Example 11.6 (a type-1 plant) built factor by factor, ...
38 min ago
K_p, K_v, K_a and the system type; the master table built cell by cell, and why finite errors lie on its diagonal; a type-1 loop lags a ...
Why delay, measured data and unstable plants need a new test; pushing a closed curve through F(s); Worked Examples 12.1 and ...
35 min ago
Op-amp PI, PD, PID, lead and lag stages; component values for the rig's lead (Worked Example 10.11); passive RC networks and ...
51 min ago
Friction as a 0.4 V dead zone: a band of resting points (Example 8.13); the sweep lag ω/K_v + V_dz/K_p (Example 8.14); gravity ...
57 min ago
Sinusoid in, sinusoid out: why a stable system only changes the size and timing of a sine, where M and φ come from (G(jω)), and ...
50 min ago
Reducing a non-unity loop to unity feedback, G_e = G/(1 + GH − G); Worked Examples 8.8 (a sensor with dynamics) and 8.9 (a ...
Ideal integral (PI) compensation and the lag network: a pole–zero pair near the origin that raises Kp or Kv and barely moves the ...
53 min ago
L(jω) = −1 is the edge of instability; gain, phase and delay margins read from the Bode plot (Worked Example 11.9); the Joint ...
44 min ago
Distance to −1: gain margin along the negative real axis, phase margin round the unit circle, the vector margin 1/Mₛ as the ...
28 min ago
Worked Example 12.13: the rig's Nyquist plots with the encoder filter and loop delay; critical gains and a 113 ms delay margin; ...
22 min ago
Getting one good point with a least-squares sine fit; reading a transfer function from Bode points (Worked Example 11.13, ...
36 min ago
PID as a PD followed by a PI: the Weija dosing loop (Worked Example 10.7) and its pidtune cross-check, removing the gravity ...
52 min ago
What one zero does to the locus, PD design from the angle deficit (Worked Example 10.4), lead compensation (Worked Example ...
2 views